• All joints are MIG or TIG  welded.
• Choice of wheel base (100", 102", or 104")
• Fabricated from 1 ¼ " square tubing  
• All frame rails are precisely located and pre-drilled within a custom jig.
• Frame is cross-braced with 1 ¼ and ¾ " square tubing
• Rear frame is 1 X 3 " tube to create a guard for fuel cell.
• Side frame is 1 X 3 " tubing to protect the sides of the body.
• 1/8 " plate for all 8 body mount locations
• Front frame designed so radiator can be removed from under the front of the car

Wooden mock-up with floor
-
Rear end of frame in jig